ETK 60S ELECTRIC AUTOMATIC WALKING SERIES DIAMOND WIRE BLOCK MARBLE CUTTING MACHINE: It is a diamond wire block marble cutting machine that can cut at the desired angle, and its feature is that it is designed to move back and forth on a demountable rail block and a chassis that contains the necessary elements for the structure is positioned on the lower part of the chassis and a walking motor that allows the structure to move. The gear reducer, which controls the movement of the travel reducer, is positioned on the travel reducer, a motor that can move the main pulley with a shaft, a hydraulic coupling positioned between the shaft and the shaft, which provides a gearbox movement that regulates the movement between the shaft and the main pulley, a hood surrounding and protecting the internal parts of the machine An electrical panel that provides the control of a positioned machine is connected to the main pulley by the guide pulley arm, at least one auxiliary pulley connected to the main pulley to allow the wire to pass over the main pulley and the auxiliary pulley. A casing positioned at the rear of the pulley is flush with the casing at the front of the casing, but with the cable carrier positioned opposite the casing, the machine can perform serial cutting, the slack formed in the wire during cutting is automatically removed by the travel motors. It is turned with the help of pulleys and cuts and separates the block marble. Thus, the cutting process is completed. In the marble block cutting machine with electric diamond wire, water is sent to the cutting area with hoses during the cutting process and control can be achieved with the help of the valve. Thanks to the water, the cutting tool (Diamond Wire) is prevented from overheating and the marble dust generated is removed from the cutting area.



Teknik Özellikler

Engine Type Electric
Motor power 60 HP 45 KW
Engine Speed 1500 d/d (Rpm)
Motor Voltage 380V
Walking System 2HP, 1,5KW, 380V, 1500 d / d (Rpm) A.C. Engine Automatic Tuned
Wire to be used Diamond
Cutting Speed ​​Hour 10-15 m² SURFACE Hour
Capacity 100 – 150 m
Working Angle 360 ° in all positions
Rail Piece Meter 3 pieces, 2 meters each
Water Need Hours 500 Liter Hour
Big Pulley Diameter 80 cm 1 piece
Direction Pulley Diameter 30cm 1 Piece
Weight 1600 Kg.
Length 2400 mm
Height 1800 mm
Width 1030 mm
Registered trademark KAPTANLAR
Commercial Model ETK 60S
Lifetime 10 years
Warranty Period 2 years
Service Time 20 working days


Ürün Videoları




Featured Products

Kaptan Rock - Tracked

Crawler Marble Drilling Machine


Kaptan Rock - Wheeled

Wheeled Marble Sondaj Machine


KTK 80S - Bridge Cutting

Block marble cutting machine with electric slide with automatic walking, angled diamond wire


ETK 80S - Diamond Wire Cutting

Electric Automatic Walking Series Diamond Wire Block Cutting Machine


ETK 60S - Diamond Wire Cutting

Electric Automatic Walking Series Diamond Wire Block Marble Cutting Machine