ETK 80S ELECTRIC AUTOMATIC WALKING SERIES DIAMOND WIRE BLOCK CUTTING MACHINE

It is a diamond wire block marble cutting machine that can cut at the desired angle, and its feature is a chassis that is designed to move back and forth on a removable rail block and contains the necessary elements for the structure, a walking motor that is positioned at the bottom of the chassis and allows the structure to move. The gear reducer, which controls the movement of the drive motor, is positioned on the travel reducer, a motor that can move the main pulley with a shaft, a hydraulic coupling positioned between the motor and the shaft, which provides a gearbox movement that regulates the movement between the shaft and the main pulley. At least one auxiliary pulley connected to the main pulley to allow the wire to pass over the main pulley and the auxiliary pulley connected to the main pulley with the guide pulley arm. A casing positioned at the rear of the mci pulley is flush with the casing at the front of the casing, but the cable carrier is positioned in front of the casing. It is turned with the help of pulleys and cuts the block marble. Thus, the cutting process is completed. In the marble block cutting machine with electric diamond wire, water is sent to the cutting area with hoses during the cutting process and control can be achieved with the help of the valve. Thanks to the water, the cutting tool (Diamond Wire) is prevented from overheating and the marble dust generated is removed from the cutting area.