AOSM 25 - Auto Sizing
AOSM 25 ELECTRIC ANGLE AUTOMATIC COUNTING MACHINE:
The cutting process enables the diamond wire with the help of a pulley to be rotated around the marble block for cutting and separating it. When the machine starts, the motor rotates the shaft and turns the pulley and hence the marble block is cut with the help of diamond wire. The engine is fixed on a car and a pulley connected to the engine shaft is used. The slack in the wire during cutting is automatically removed by the travel motor. Thus, the cutting process is completed. During the cutting process of the electric diamond wire block cutting machine, water is sent to the cutting area with hoses and it can be used with the help of a valve. Thanks to the water, the cutting tool (diamond wire) is prevented from overheating and the marble dust is removed from the cutting area.
Technical Specifications
Engine Type | Electric |
Motor power | 18,5 kW (25 hp) veya 22 kW (30 hp) |
Engine Speed | 1500 rev/min (rpm) |
Motor Voltage | 380 V |
Walking System | AUTOMATIC SPEED CONTROL WITH REDUCTOR |
Wire to be used | Diamond |
Cutting Speed | 5 -6 m² surface / hour |
Wire Rotation Capacity | 25 – 35 m |
Working Angle | 180 ° in all positions |
Water Need | 200 liter per hour |
Pulley Diameter | 50 cm, 1 Piece |
Weight | 600 kg |
Length | 3400 mm |
Height | 1400 mm |
Width | 1500 mm |
Registered trademark | KAPTANLAR |
Commercial Model | AOSM 25 |
Lifetime | 10 years |
Warranty Period | 2 years |
Service Time | 20 working days |
User'S Guide
Product Video